Media Gateway 用于监控车载以太网通信，以太网端口测试，CAN/LIN/Flexray与100Base-T1路由测试等；在BMW，AUDI，BOSCH以及国内多公司大量使用；
MediaGateway from Technica Engineering is a development tool for testing and analyzing on-board vehicle networks.
MediaGateway from Technica Engineering is the most widely used development and testing tool for on-board vehicle networks using 100BASE-T1. It’s in-built automotive switches and 12 x 100BASE-T1 ports enable both capture of traffic between devices while maintaining the normal communication, as well as interaction with such devices via your test set-up. It supports single and double tagging of VLANs, Mirroring, Forwarding and more.
MediaGateway is excellently suitable for subsystem testing stations and can also be installed in a test vehicle without complications. It is configured conveniently via a browser through the integrated web server.
An additional and optional CAN-Ethernet bi-directional conversion is available, as well as FlexRay logging via Ethernet and one SFP slot.
The SFP slot supports commercial-grade SFP modules (e.g. optical or RJ-45) as well as our 100BASE-T1 SFP Module in order to get a 13th Automotive Ethernet Port or our 1000BASE-T1 SFP Module – this makes the MediaGateway ready for Automotive Gigabit Ethernet!
12 Broadcom 100BASE-T1 ports (100 MBit/s full duplex on a single unshielded twisted pair)
3 Gigabit Ethernet ports
1 SFP Gigabit Ethernet port
Automotive Tyco MQS connectors for 100BASE-T1 and power supply
Web server for easy configuration: Master/Slave, HalfOut/FullOut, Port Forwarding, Port Mirroring, VLAN Tagging
WakeUp function by CAN Bus or Wakeline
Power output for attached devices: VBAT max. 1 Ampere in total
19 status LEDs
Possibility to reset to default settings by pushbutton
Robust steel case
Power requirement: 8 to 16 V DC, power consumption: 8 Watt
Size: 195 x 143 x 33 mm
802.1AS Bridge function
2024-01-09 10:41:34
2.29MB
1
基于Keil+51单片机用定时器T1中断控制两个LED以不同周期闪烁.rar（源码+仿真）基于Keil+51单片机用定时器T1中断控制两个LED以不同周期闪烁.rar（源码+仿真）基于Keil+51单片机用定时器T1中断控制两个LED以不同周期闪烁.rar（源码+仿真）基于Keil+51单片机用定时器T1中断控制两个LED以不同周期闪烁.rar（源码+仿真）基于Keil+51单片机用定时器T1中断控制两个LED以不同周期闪烁.rar（源码+仿真）基于Keil+51单片机用定时器T1中断控制两个LED以不同周期闪烁.rar（源码+仿真）基于Keil+51单片机用定时器T1中断控制两个LED以不同周期闪烁.rar（源码+仿真）基于Keil+51单片机用定时器T1中断控制两个LED以不同周期闪烁.rar（源码+仿真）基于Keil+51单片机用定时器T1中断控制两个LED以不同周期闪烁.rar（源码+仿真）基于Keil+51单片机用定时器T1中断控制两个LED以不同周期闪烁.rar（源码+仿真）基于Keil+51单片机用定时器T1中断控制两个LED以不同周期闪烁.rar（源码+仿真）基于Kei
2023-04-09 14:32:21
27KB
1
韵达T1快递打印机驱动程序
第一步-
解压双击 InstallPrintDriver 安装驱动程序
第二部
打开设备管理器找到YUNDAT1点击右键更新驱动程序
依次点击
浏览计算机以查找驱动程序
从计算机的设备驱动程序列表中选择
打印机
第三部
厂商列表拉到最下面找到（文云科技）选择右边的文云科技-YUNDAT1
点击下一步这时候会有这个驱动程序不兼 的提示，不用管他直接点是就可以完成安装
2022-10-03 09:04:45
324KB
1