软件接口定义语言的设计和建模.doc

网线水晶头RJ45接口定义.doc

USB 3.0采用的双总线结构，在速率上已经达到4.8Gbps,所以称为Super speed,在USB 3.0的LOGO上显示为SS,由于接口变化太大，再加上把USB 3.0协议集成到相关芯片组肯定也需要时间，所以USB 3.0的普及应该至少再需三年以上。 　　说明： 　　本文插图及封装尺寸来源，USB 3.0-final.pdf（Date:November/12/2008），USB 3.0协议可在USB官方 下载到。 　　USB 3.0中定义的连接器包括（本文不包含连接线缆）： 　　§USB 3.0 A型插头和插座 　　§USB 3.0

MODBUS：SUN2000-(100KTL-M0, 100KTL-M1, 100KTL-INM0, 110KTL-M0, 125KTL-M0) MODBUS接口定义描述

激光行业中及一些高精度需求的行业中关于硬件的介绍，包括软件的一些编译D A N G E R : This product contains potentially lethal voltages. To reduce the possibility of electrical shock, bodily injury, or death the following precautions must be followed. 1. Disconnect electrical power before servicing equipment. 2. Disconnect electrical power before performing any wiring. 3. Access to the Ndrive CP and component parts must be restricted while connected to a power source. 4. To minimize the possibility of electrical shock and bodily injury, extreme care must be exercised when any electrical circuits are in use. Suitable precautions and protection must be provided to warn and prevent persons from making contact with live circuits. 5. Install the Ndrive CP inside a rack or enclosure. 6. The shunt resistor temperature can exceed 70°C during normal operation and contains lethal voltage on its terminals and surface. It must be properly enclosed and shielded to avoid risk of fire and operator shock. 7. Do not connect or disconnect any electrical components or connecting cables while connected to a power source. 8. All components must be properly grounded in accordance with local electrical safety requirements. 9. Operator safeguarding

SUN2000 V200R002 MODBUS接口定义描述

RS485接口定义图pdf,

启划信息科技Amlogic S905D3核心板接口定义，四核Cortex-A55, 人工智能核心板，安卓9.0， 核心板接口定义说明，支持PCIE，1000M

SATA数据和电源接口定义详解（多图），讲解非常细致。

USB3.0 连接器引脚、接口定义及封装尺寸 本文插图及封装尺寸来源， USB 3.0-final.pdf（Date:November/12/2008）， USB 3.0 协议可在 USB 官方下载到。 USB 3.0 中定义的连接器包括（本文不包含连接线缆）： USB 3.0 A 型插头和插座 USB 3.0 B 型插头和插座 USB 3.0 Powered-B 型插头和插座 USB 3.0 Micro-B 型插头和插座 USB 3.0 Micro-A 型插头 USB 3.0 Micro-AB 型插座